Ford Mustang 1992 User Manual

P/N: 4FA020-010
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
25MAR08 v4.0(86-93 5.0 Mus (4FA v4.0))
Ford 5.0L Mustang
Supercharger System
Installation Instructions
1986-1993 MODEL YEARS
50 State Smog Legal per CARB EO #D-213-17
(CARB E0 # not applicable to Renegade Kit P/N: 4FA218-100/108)
ENGINEERING, LLC
1650 PACIFIC AVENUE • CHANNEL ISLANDS, CA 93033-9901 • (805) 247-0226
FAX (805) 247-0669 • www.vortechsuperchargers.com • M-F 8:00 AM - 4:30 PM PST
®

Ford Mustang 1992 Specifications

General

Brand	Ford
Model	Mustang 1992
Category	Automobile
Language	English

Summary

PREPARATION AND REMOVAL

Disconnect Battery and Remove Major Components

CRANKSHAFT PULLEY INSTALLATION

Install Vortech Crankshaft Pulley

OIL DRAIN PROCEDURE

Prepare Oil Pan for Drain Fitting

Punch and tap oil pan for 3/8" NPT fitting. Seal fitting securely.

OIL FEED LINE CONNECTION

Connect Oil Feed Line to Engine

Install oil pressure sender, TEE fitting, 45° elbow, and connect feed line.

FUEL MANAGEMENT UNIT INSTALLATION

Install and Connect Fuel Management Unit (FMU)

T-REX® FUEL PUMP INSTALLATION

Mount and Connect T-Rex Fuel Pump

MAIN BRACKET ASSEMBLY

Assemble Supercharger Mounting Bracket

Assemble bracket, plate, and spacer for alternator and smog pump.

ACCESSORY BELT TENSIONER MOUNTING

Install Belt Tensioner Mounting Bracket

SUPERCHARGER MOUNTING

Mount Supercharger to Bracket

Place oil drain hose, connect supercharger with bolts, and secure drain hose.

SUPERCHARGER DRIVE BELT INSTALLATION

Install and Tension Drive Belt

AIR FILTER ASSEMBLY INSTALLATION

Mount Air Filter Assembly

IGNITION/BOOST CONTROL INSTALLATION

Install Ignition/Boost Control Unit

Connect unit to ignition coil, provide ground, route wires, mount knob.

VORTECH BYPASS VALVE INSTALLATION

Mount and Connect Bypass Valve

FINAL CHECK AND TEST DRIVE

Perform Final Checks and Test Drive

Check all connections, fluid levels, belts, and perform test drive.