13
%
*
[SR04100(ALL)05/95]
Automatic locking mode
*
[SR04105(ALL)05/95]
In this operating mode, the shoulder belt
retractor will be automatically locked and will
remain locked when the combination
lap/shoulder safety belt is buckled, and does not
allow the occupant freedom of movement. This
mode provides the following:
*
[SR04110(ALL)05/95]
❑
A tight lap/shoulder belt on the occupant.
*
[SR04115(ALL)05/95]
❑
Child safety seat installation.
*
[SR04117(ALL)05/95]
RWARNING
Rear-facing infant seats should never be
placed in the front seats.
*
[SR04120(ALL)03/94]
This mode must be used when installing a child
seat. To switch the retractor from the emergency
locking mode to the automatic locking mode,
perform the following steps:
*
[SR04130(ALL)03/95]
1. Buckle the lap/shoulder combination belt.
*
[SR04140(ALL)03/94]
2. Pull on the belt until all of the stored belt is
out of the retractor and a click is heard.
*
[SR04150(ALL)05/95]
3. A clicking sound will continue to be heard
as the belt is allowed to retract. This
indicates that the retractor is in the
automatic locking mode.
*
[SR04170(ALL)05/95]
NOTE: When the combination lap/shoulder
belt is unbuckled and allowed to
retract completely, the retractor will
switch to the vehicle sensitive
(emergency) locking mode. See the
detailed instructions under Safety Seats
for Children in this chapter.
File:prsrp.ex
Update:Fri Jun 23 19:39:12 1995