154
*
[DR05700(ALL)03/95]
Shifting the Gears
*
[DR05800(ALL)11/94]
The gearshift for a manual transaxle is mounted
on the floor. The gearshift can be in one of
seven possible positions, as shown.
[DR05900(ALL)05/95]
half page art:0030258-C
Shift pattern
*
[DR06100(ALL)02/91]
Always push the clutch pedal all the way in
when you shift. You should upshift according to
the speeds given in the chart later in this
chapter.
[DR06140(ALL)11/90]
Sometimes, you will upshift at higher speeds.
For example, you may want to stay in a lower
gear to gain more power for passing or for
climbing a hill. However, you must stay within
the range when you upshift or downshift.
File:prdrp.ex
Update:Fri Jun 23 19:35:02 1995