Ford Probe - Page 92

92
[SC06850(ALL)05/95]
NOTE: If your vehicle has an automatic
overdrive transaxle, you may want to
drive with the Overdrive off when
driving in hilly terrain or at high
altitudes. You may turn the Overdrive
off and use Drive by pressing the
Overdrive off (O/D OFF) button. This
will improve speed control
performance.
*
[SC06900(ALL)01/95]
Resetting the Speed Control
[SC06950(ALL)05/95]
To reset the speed control to a lower speed,
press and hold the CST switch. Let your vehicle
slow down to the desired speed and release the
CST switch.
[SC06975(ALL)01/94]
If you have a 2.0L automatic transaxle vehicle
you may reset the vehicle speed control to a
lower speed by pushing, and then quickly
releasing, the CST switch. Each time you do this,
the set speed will decrease by 1 mph
(1.6 km/h). See Tap Up and Tap Down in this
chapter.
[SC07000(ALL)05/95]
To reset the speed control to a higher speed, you
can follow one of these procedures:
[SC07050(ALL)01/94]
❑
Accelerate to the desired speed using the
accelerator pedal, then press the SET ACC
switch and release it immediately.
[SC07100(ALL)01/94]
❑
Press and hold the SET ACC switch until the
vehicle accelerates to the desired speed, then
release the switch.
[SC07125(ALL)01/94]
❑
Push, and then quickly release, the SET ACC
switch. Each time you do this, the set speed
will increase by 1 mph (1.6 km/h). (NOTE:
This feature is only available on 2.0L
automatic transaxle vehicles.) See Tap Up and
Tap Down in this chapter.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995