Electronic Sound Systems
47
*
[AS30010(R)03/96]
■ Using the ”TUNE“ function
*
[AS30015(R)03/96]
You can change the frequency up or down one increment at
a time by pressing and releasing either the left
b
or right
a
side of the ”TUNE“ button.
*
[AS30020(R)03/96]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies in this section.)
*
[AS30025(R)04/96]
■ Using the ”SEEK“ function
[AS30030(R)05/96]
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right (
a
) side of the ”SEEK“ button to select the next
listenable station up the frequency band. Press the left (
b
)
side of the button to select the next listenable station down
the frequency band. By holding the button down, listenable
stations can be passed over to reach the desired station.
*
[AS30035(R)04/96]
■ Using the ”SCAN“ function
*
[AS30040(R)03/96]
Pressing the ”SCAN“ button will begin the scan mode up
the frequency band, stopping on each listenable station for
approximately five seconds.
*
[AS30045(R)03/96]
To stop the scan mode on the presently sampled station,
press the ”SCAN“ button again.
*
[AS30050(R)02/96]
■ Setting the Station Memory Preset buttons
*
[AS30055(R)10/95]
Your radio is equipped with 6 station memory buttons.
These buttons can be used to select up to 6 preset AM
stations and 12 FM stations (6 in FM1 and 6 in FM2).
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
To Next Page
Loading...
Need help?
General
