ENGINE
Configuration Supercharged longitudinally
mounted, 90-degree V8, single
overhead cam, cast iron cylinder
block and cast aluminum cylinder
heads
Bore x Stroke 90.2 x 105.8 mm (3.55 x 4.17 in)
Displacement 5409 cc (330.1 cid)
Compression ratio 8.4:1
Horsepower (SAE net) 284 kW @ 4750 rpm (380 HP @
4750 rpm)
Torque 610 Nm @ 3250 rpm (450 lb.-ft. @
3250 rpm)
Redline 5250 rpm (fuel shut-off at 5500
rpm)
Specific output 52.5 kW/L (70.2 HP/L)
Valvetrain Single overhead cam, silent-design
chain drive, roller finger followers
with hydraulic lash adjustment,
ovate-wire valve springs, two
valves per cylinder
Fuel system Sequential electronic fuel injection
Ignition system Coil-on-plug electronic ignition
Mass air sensor 90 mm (3.54 in) diameter, high
flow capacity
Throttle body Twin 57 mm (2.24 in) diameter
bore-simultaneously open
Supercharger Eaton-Model 112, Generation IV,
55 kPa (8 psi) mechanical boost
Exhaust manifolds Cast-high silicon, molybdenum iron
Exhaust system Dual-stainless steel
Engine/Transmission
7
To Next Page
Loading...
