44. Remove the support bracket.
1. Remove the nuts.
2. Remove the bolts.
3. Remove the bracket.
45. Lower the transaxle assembly from the engine compartment.
46. Remove the rear engine support mount.
47. Remove the bracket.
48. Remove the wiring harness bracket from the transmission.
49. Carry out transmission fluid cooler backflushing and cleaning. For additional information, refer toTransmission Fluid Cooler — Backflushing and Cleaning in this section.
2002 Taurus/Sable Workshop Manual
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS2H/~MUS~LEN/20/