Activating the system
Switch the system on within the information display. See Information
displays.
Turn the lighting control to the
autolamps position.
Manually overriding the system
When the automatic control has
activated high beams, pushing or
pulling the stalk will provide a
temporary override to low beam.
To permanently deactivate the
system use the information display
menu or turn the lighting control
switch from autolamps to
headlamps.
DIRECTION INDICATORS
• To operate the left direction
indicator, push the lever down
until it stops.
• To operate the right direction
indicator, push the lever up until
it stops.
• To manually cancel direction
indicator operation, push the
lever again in either direction.
Note: Tap the lever up or down to make the direction indicators flash
only three times to indicate a lane change.
Lighting 93
2014 Taurus
Owners Guide gf, 3rd Printing, January 2014
USA (fus)
To Next Page
Loading...
Need help?
General
