Ford Taurus 2015 - Displaying the Factory-Set Code; Trunk Release; From Inside Your Vehicle; Vehicles with Intelligent Access

Displaying the Factory-Set Code
With Integrated Keyhead Transmitters
Note: You will need to have two programmed passive anti-theft keys for
this procedure.
To display the factory-set code in the information display:
1. Place the first programmed key into the ignition and switch on the
ignition.
2. Switch the ignition off and remove the first programmed key.
3. Place the second programmed key into the ignition.
The factory-set code will briefly appear in the message center.
TRUNK RELEASE
From Inside Your Vehicle
Press the button located on the instrument panel.
Vehicles with Intelligent Access
1. Unlock the trunk with the remote
control or power door lock control.
The trunk unlocks when you press the
release button if the intelligent access
transmitter is within 3 feet (1 meter)
of the trunk.
2. Press the release button located
near the license plate.
Locks 75
2015 Taurus
Owners Guide gf, 2nd Printing, November 2014
USA (fus)