Lower the spare wheel by inserting
the hexagonal end of the wheelbrace
into the guide hole. Turn the
wheelbrace anticlockwise until the
wheel rests on the ground and there
is slack in the cable.
Detach the first cable by unscrewing
and sliding back the cap. Turn the
nipple at the end of the cable through
90 degrees.
Detach the second cable by
unscrewing the nut.
Removing a road wheel
WARNINGS
Park your vehicle in such a
position that neither the traffic
nor you are hindered or endangered.
Set up a warning triangle.
120
Wheels and tyres
To Next Page
Loading...
