•
Carefully seperate the transmitter
unit from the key using a flat
object (e.g. a screwdriver) at the
recess on the back.
•
Carefully prise out the battery with
the flat object. Fit the new battery
between the contacts with the +
sign facing downwards.
Reassemble the transmitter unit
in reverse order.
•
Open the transmitter unit by
seperating the retaining clips on
the sides with the flat object.
•
Carefully prise out the battery with
the flat object. Fit the new battery
between the contacts with the +
sign facing downwards.
Reassemble the transmitter unit
in reverse order.
24
Keys and remote controls
To Next Page
Loading...
