Ford Windstar - Page 303

Maintenance and Care
303
[MC16700(ALL)07/96]
Wiper Blade Replacement
*
[MC16800(ALL)01/96]
If the wipers still do not work properly after you clean them,
you may need to replace the wiper blade assembly. When
replacing the wiper blade assembly always use a Motorcraft part
or equivalent.
*
[MC16900(ALL)08/95]
To replace the wiper blades:
*
[MC17000(ALL)01/96] 1. Pull the wiper arm away from the windshield and into the
lock position.
[MC17100(ALL)01/96] 2. Turn the blade at an angle from the wiper arm. Squeeze the
lock tabs of the plastic clip together to release the blade and
pull the wiper blade down toward the windshield to remove
it from the arm.
*
[MC17200(ALL)08/95] 3. Attach a new wiper blade to the wiper arm and press it into
place until you hear it click.
%
*
[MC17300(ALL)01/96] Tires
[MC17400(ALL)04/96]
Look at your tires each time you fill your fuel tank. If one tire
looks lower than the others, check the pressure in all of them.
[MC17500(ALL)01/96]
■ Keep your tires inflated to the recommended pressures. See
Checking the pressure of the tires later in this chapter.
*
[MC17600(ALL)01/96]
■ Stay within the recommended load limits. See Driving with a
heavy load in the Index.
*
[MC17700(ALL)03/96]
■ Make sure the weight of your load is evenly distributed.
*
[MC17800(ALL)03/96]
■ Adjust tire pressure to recommended specifications found on
the Safety Compliance Certification Label.
*
[MC17900(ALL)03/96]
If you do not take these precautions, your tires may fail or go
flat.
File:11wnmcs.ex
Update:Mon Jul 8 14:29:32 1996