Need help?Do you have a question about the Forehorse FEM3 and is the answer not in the manual?
Switch between different riding modes using '+' and '-' buttons.
Activate assist mode by long-pressing the '-' button.
Control display backlight and headlights with '+' button.
Cycle through Trip, ODO, and riding time displays via MODE button.
Clear trip and single riding time by long-pressing M and - buttons.
Visual representation of the remaining battery capacity.
Displays error codes for system malfunctions.
Toggle between miles and kilometers for distance units.
Configure the maximum allowable riding speed.
Set the wheel diameter for accurate speed and distance readings.
Adjust the number of available assist levels or gears.
Adjust the brightness level of the display backlight.
Set the time until the display automatically powers off.
Configure the duration before the display enters sleep mode.
Exit the current user settings level.
Configure the device's unique identification number.
Exit the Level 2 settings menu.
Set a password for powering on the display.
Enable or disable the power-on password feature.
Enable or disable a specific 'Stall L' setting.
Exit the Level 3 settings menu.
To Next Page
General