** WARNING**
Ø KEEP DETECTOR AWAY FROM ELECTROMAGNETC & MAGNETIC
INTERFERENCES (i.e. PHONES & MAGNETS)
Ø STORE DETECTOR WITHIN SPECIFICATIONS
Ø IF UNWELL, SEEK CLEAN AIR & MEDICAL ATTENTION.
Ø FOLLOW INSTRUCTIONS AS THE DETECTOR IS VERY SENSITIVE
Ø TO ENSURE ACCURACY, CALIBRATE DEVICE AT LEAST EVERY 6 MONTHS
Ø CHECK AND SET ALARM LEVELS APPROPRIATELY TO AVOID HARMFUL
EXPOSURE - CONSULT WITH YOUR SAFETY OFFICER OR WITH
STATE/FEDERAL AGENCIES.
Ø DO NOT TOUCH PROBE AFTER A FLUE GAS MEASUREMENT, IT IS VERY HOT
AND BURNING TO SKIN WILL OCCUR
Ø TAKE ALL PRECAUTIONS WHEN UNDERTAKING COMBUSTION
MEASUREMENTS AS TO NOT ALLOW TOXIC GASES INTO YOUR
BREATHABLE ZONE
Ø KEEP AWAY FROM DUST & PARTICULATE AND NEVER EXPOSE TO
CONCENTRATED VAPORS, HARSH CHEMICALS OR EXTREMELY HIGH
CONCENTRATION LEVELS AS IT MAY POISON THE SENSOR
Ø SENSOR LIFE IS 2 YEARS FROM RECEIPT. IF DEVICE HAS BEEN TAKEN
CARE OF THE SENSOR CAN LAST LONGER, BUT MAY REQUIRED
CALIBRATION MORE OFTEN TO OPERATE WITHIN PERFORMANCE
SPECIFICATIONS.
Ø DO NOT USE THIS DETECTOR FOR LIFE THREATENING APPLICATIONS SINCE
THIS DETECTOR DOES NOT HAVE BUZZER OR VIBRATION ALARMS, THEY
HAVE BEEN DELIBERATELY REMOVED FOR THE COMBUSTION MODEL FD-
4A. THIS IS NOT A PERSONAL PROTECTION DEVICE. BE ATTENTIVE.
To Next Page
Loading...