PRODUCT FEATURES
• Measures CO (ppm) & O2 (%)
• Calculates COAF (air free) & EA (excess air)
• Comes with a Water Trap, Particle & NOx filters
• For residential combustion AND / OR ambient applications
• Strong magnet for easy mount on appliances
• Rechargeable Lithium-ion battery via easy USB charger
• Professional aluminum hard-case
• Electronic Pump with Stainless Steel Probe
PRODUCT COMPONENTS
1. Analyzer - CO & O2 sensors with a niobium magnet for mounting.
2. Electronic Pump with Stainless Probe.
3. Hose assembly. 3 feet of silicone tubing, Water trap, particle and NOx filters with
sensor cap. The NOx filter removes cross-interfering acid gases to minimize CO
sensor interference.
4. Aluminum Hard-case
5. Screw to mount sensor cap to the Analyzer
6. USB Charging cable
7. USB Charger
8. Analyzer and Pump Aluminum Case
9. Calibration Certificate
10. Manual (this document)
USER TIPS
- Ensure the analyzer and pump are stored well within specifications.
- When using the analyzer, condensation may occur and the water trap will
slowly fill with water. Keep track of this. Empty as necessary. Always empty
before storing and retiring the unit after working. Some condensation may
occur in the electronic pump. Run the pump with fresh air to ensure
condensation within the pump has been removed.
- The NOx filter will last for the life of the detector.
- The sensors have a rated life of 2 years. If well taken care of, they can last
longer (up to 3 years) but will require more frequent calibration.
- Please email FORENSICS DETECTORS if any part requires replacement.
- FORENSICS DETECTORS does not offer sensor replacement. Given the
price point of the detector and cost of the sensor parts, shipping and
calibration, it is simply not economically viable to allow for customer
sensor replacement – and easier to replace the detector. Both pump and
detector can be separately purchased, email us.
- If unsure, always ask. Email us: forensicsdetectors@gmail.com
To Next Page
Loading...