3
BEFORE YOUR 1ST TREATMENT PERFORM
A SIMPLE COMPATIBILITY TEST.
Test the device on a less sensitive area, such as the inner arm, before beginning treatment on the face
following the exact HOW TO USE instructions. Wait 24 hours and check the treated area. If you don’t
notice any difference (redness or skin irritation) between the treated and untreated skin, you may
begin the Acne Clearing Blue Light treatments.
3. ON/OFF BUTTON
1. TREATMENT SURFACE
2. ANTIBACTERIAL SILICONE
5. INDICATION LIGHT
4. CHARGING PORT
ESAPA DA™ OVERVIEW
ESPADA™ FEATURES
BLUE (LED) LIGHT –
for killing acne bacteria. Activates when device
touches the skin. Flashes 3 times to indicate the
start of the 30-second treatment in Steady
Mode. If moved from the skin the light
automatically turns off.
T-SONIC™ PULSATIONS –
stimulates blood microcirculation, facilitating
the skin’s renewal. The pulsations begin when
the device is placed on the skin and gradually
increase in speed until the treatment is finished.
TARGETING LIGHT (RED CROSS-SHAPED LIGHT) –
targets the exact spot you wish to apply
treatment. Active when device is away from the
skin and turns off when the device touches the
skin.
BUILT-IN TIMER –
pulsations pause once every 30 seconds to
indicate the end of 1 blemish-treating routine.
After the pause is felt, the device should be
moved to the next treatment spot.
To Next Page
Loading...
