EasyManua.ls Logo

Forest garden Ultima Arch User Manual

Default Icon
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ULTIMA ARCH ASSEMBLY
ISSUE 0210
Fixing Pack Contents (UPARTFP) :
Required Tools : (Not Supplied )
Important :
Assembly
of this arch
requires
two people.
Helpful Tip : use the illustration of the screw/nail shown in each step to help you
identify which fixing is required during the assembly of your arch.
SHOULD YOU REQUIRE ANY ADDITIONAL GUIDANCE WITH THE ASSEMBLY OF YOUR ARBOUR PLEASE
CONTACT OUR TECHNICAL HELP LINE ON 0844 248 9853.
Thank you for choosing this arch manufactured by the UK's largest manufacturer of timber garden products. In order to gain the most benefit from it, please note
the following:
- If there are any technical queries with the product, please contact our customer help line on 0844 248 9853 between the hours of 8.30 am and 5.00 pm Mondayto
Friday.
-This product is pressure treated to ensure the longevity of all timber components and protect against rot. This may leave a colour difference on some parts that will
even out as a the moisture content stabilises.
- Please ensure that you thoroughly check all component parts for quantity and quality before you commence building the product. If there are any missing parts,
please contact the help line as shown immediately. The manufacturer cannot be held liable for damaged items once any part of the product has been fitted or altered
in any way (e.g. Painted)
- Timber is a natural material. It will shrink and swell as a result of varying moisture content.
- Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation.
Please note : arbour uprights will need to be concreted 465mm into ground.
Alternatively, if using post supports, you will be required to trim 465mm off the
bottom of each post.
70mm Screw x 10
50mm Screw x 24
SPIRIT LEVEL
TAPE MEASURE
HAMMER
POZI DRIVE SCREWDRIVER
DRILL
4
2
2
4
2
UPARTSU
POST 2400mm
ELD62
PLANED LATTICE 6x2ft
UPARTNRLN
LARGE NOTCHED
RAFTER
UCBC
ANGLED
BRACE
URCB6
LONG RAFTER
UPARTNRSN
SMALL
NOTCHED
3
1820
1465
790
2447,5
1355
“IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY”
Forest Garden Ltd, Units 291 & 296 Hartlebury Trading Estate, Hartlebury, Worcestershire, Dy10 4JB
Question and Answer IconNeed help?

Do you have a question about the Forest garden Ultima Arch and is the answer not in the manual?

Forest garden Ultima Arch Specifications

General IconGeneral
TypeGarden Arch
Weather ResistanceYes
Assembly RequiredYes
MaterialWood
TreatmentPressure Treated

Summary

Important Assembly Information and Components

Customer Support and Product Advice

Contact customer help line for technical queries and product advice.

Fixing Pack Contents

Details the screws and components included in the UPARTFP fixing pack.

Required Tools for Assembly

Lists the tools that are not supplied but are necessary for assembly.

Assembly Assistance Note

Important note that assembly of this arch requires two people.

Assembly Step 1: Lattice Attachment

Assembly Step 2: Rafter and Post Assembly

Assembly Step 3: Notched Rafter Placement

Assembly Step 4: Angled Brace Installation