2
90MM
SCREWS
3
4
Position and secure the Base to the bottom of the
Front and Back Panels, as shown above.
Position and secure the Back Panel to the ends of the
Left and Right panels, using 4 x 90mm screws. Ensure
the Back Panel is ush to the sides.
HEALTH & SAFETY
DO NOT CLIMB THIS PRODUCT
We strongly recommend that PPE (Personal Protective Equipment) is used throughout your build to ensure you are
protected from any potential health and safety risks. Do not exempt yourself from wearing PPE.
BACK PANEL
BASE
Lay out and position the Jute Liner material inside
your planter. Overlap over the top edge.
JUTE LINER
To Next Page
Loading...