Forma Scientific, Inc.____________________________________________Contents
v
Table of Contents
Section 1 - Receiving
1.1 Preliminary Inspection
1.2 Visible Loss or Damage
1.3 Responsibility for Shipping Damage
1.4 Unpacking List
Section 2 - Introduction
2.1 Description
2.2 Theory of Operation
2.3 Airflow Diagram (Fig. 2.0)
Section 3 - Installation
3.1 Location
3.2 Power Connection
3.3 Plumbing Connection
3.4 Exhaust Requirements
Section 4 - Operation
4.1 Control and Indicating Devices
a. Blower Switch
b. Light Switch
c. Ultra-Violet Light (optional)
d. Alarm By-Pass Switch (sliding window models only)
e. Static Pressure Gauge (in. W.G.)
f. Blower Speed Control
1. Measuring Blower Motor Voltage
g. Blower Motor/Lights Reset Button (15 Amp)
h. Receptacle Reset Button (15 Amp)
i. Duplex Receptacles
To Next Page
Loading...
