Forma Scientific, Inc.___________________________________________Receiving
1-1
Section 1 - Receiving
1.1 Preliminary Inspection
This safety cabinet was thoroughly inspected and carefully packed prior to
shipment and all necessary precautions were taken to ensure its safe arrival.
Immediately upon receipt, before the unit is moved from the receiving area, carefully
examine the shipment for loss or damage. Unpack the shipment and inspect both
interior and exterior for any in-transit damage.
1.2 Visible Loss or Damage
If any loss or damage is discovered, note any discrepancies on the delivery
receipt. Call the delivering carrier and request that their representative perform an
inspection.
1.3 Responsibility for Shipping Damage
For products shipped F.O.B. Marietta, Ohio, the responsibility of Forma
Scientific, Inc. ends when the merchandise is loaded onto the carrier's vehicle.
On F.O.B. Destination shipments, Forma Scientific's and the carrier's
responsibility ends when your Receiving Department personnel sign a free and clear
delivery receipt.
Whenever possible, Forma Scientific, Inc. will assist in settling claims for
loss or in-transit damage.
1.4 Unpacking List
Included with the Installation/Operation manual are four index buttons.
These buttons may be used to identify the type of service supplied to the service
valves. Also, included in a separate bag, is a small Allen wrench (used for calibrating
the Static Pressure Gauge). This Allen wrench should be kept with the Manual at all
times.
To Next Page
Loading...