Fort Pro Series - Wireless Radio Specifications (EPC; North America ISM Radio (EPC; European ISM Radio (EPC; TABLE A-4. Safety Output Specifications

Pro Series User Guide 1.6.0 v1 A-5
Wireless Radio Specifications (EPC)
TABLE A-4. Safety Output Specifications
Wireless Radio Specifications (EPC)
You can configure the Endpoint Controller with several different radios based on frequency requirements and local
regulations. Prior to ordering and deployment, consult local regulations to ensure that you are installing the proper
radio.
North America ISM Radio (EPC)
The following table provides the specifications for North America ISM radio 902-928 MHz:
TABLE A-5. (EPC) North America ISM Radio Specifications
European ISM Radio (EPC)
The following table provides specifications for the European ISM radio:
Specification Minimum Typical Maximum
PVin (12V operation)
9.6 12 14.4
Output ON State
9.6V 12 14.4
On-state Voltage Drop
1.057 V
PVin (24V operation)
19.2 24 28.8
Output ON State
9.6V 24V 28.8
Safety Outputs
Three dual channel outputs
Output safe state (logic OFF/
LOW)
0 V 0V 0V
Output Type
Current Sourcing
Current (per output channel)
750 mA
Current (off)
0.714 uA @8 V 0.892 uA @32 V
Leakage Current (OFF state)
0.714 uA @8 V 0.892 uA @32 V
OSSD Pulse Width
300 μS
OSSD Pulse Period
200 mS
Specification Minimum Typical Maximum
Frequency
902 MHz 928 MHz
Bandwidth
600 kHz
Channels
21
Receive Sensitivity
-100 dBm
Modulation
2-GFSK