fortessa DIGI-2 User Manual

DIGI2 SYSTEM
TECHNICAL MANUAL

fortessa DIGI-2 Specifications

General

Brand	fortessa
Model	DIGI-2
Category	Intercom System
Language	English

Summary

External Units

Instructions for installing external audio-video unit standard

Guide on installing the standard external audio-video unit.

Instructions for assembling an informative module FT3326, FT3344 and FT3346

Guide for assembling informative modules FT3326, FT3344, and FT3346.

Instructions for installing external audio-video unit vandal resistant

Guide on installing the vandal-resistant external audio-video unit.

Digital Call Module FT3340

7) MANAGING THE DIRECTORY

How to manage the user directory.

7A) ENTERING A NAME

How to add names to the directory.

7B) ENTERING BY MEANS OF FT1230

Process for entering names using the FT1230 programmer.

7C) ENTERING BY MEANS OF SOFTWARE FT1249/A

Instructions for entering names via FT1249/A software.

7E) ENTERING DIRECTLY FROM THE KEYPAD

Method for manual name entry via keypad.

7F) CHANGING A NAME OR A USER CODE

How to modify existing names or user codes.

7G) CANCELLING A NAME

Steps to delete a name from the directory.

7H) CANCELLING A NAME BY MEANS OF FT1230

Process for deleting names using FT1230 programmer.

8) SETTING THE OPERATING MODE

Setting the operating mode (Standard or Indirect Code).

8A) STANDARD CALL MODE (Default)

Explanation of the default standard call mode.

8B) INDIRECT CODE CALL MODE

Explanation of the indirect code call mode.

9) MODIFYING THE SYSTEM PARAMETERS

How to modify system parameters for porter modules.

9A) SETTING THE PORTER FT1602-FT4660 PARAMETERS

How to set parameters for FT1602/FT4660 porter modules.

10) MANAGEMENT OF THE ACCESS CONTROL FUNCTION

Managing the access control function.

10A) DEFAULT SUPERCODE

Information on the default supercode for access control.

10B) CHANGING THE SUPERCODE

Process to change the supercode for access control.

10C) RESETTING THE SUPERCODE

Procedure to reset the supercode.

10D) ENTERING A PASSWORD CODE

How to set a password for door opening.

10E) CANCELLING A PASSWORD CODE

How to delete a previously set password.

10G) SEARCHING FOR A PASSWORD CODE

Method to search for stored passwords.

10H) ACTIVATING THE DOOR OPENING RELAY BY ENTERING THE PASSWORD CODE

How to use a password to activate the door opening relay.

Electronic Name Directory Module FT3342

2) ACCESSING THE CONFIGURATION STAGE

Steps to enter the configuration mode of the FT3342 module.

5A) SCROLLING AND CALLING THE USER SELECTED

How to scroll users and make calls using the name directory.

5B) SEARCHING FOR A NAME IN THE DIRECTORY

Method to search for names within the directory.

6) MANAGING THE DIRECTORY

How to manage the user directory.

6A) ENTERING A NAME

How to add names to the directory.

6B) ENTERING BY MEANS OF FT1230

Process for entering names using the FT1230 programmer.

6C) ENTERING BY MEANS OF SOFTWARE FT1249/A

Instructions for entering names via FT1249/A software.

6E) CANCELLING A NAME BY MEANS OF FT1230

Process for deleting names using FT1230 programmer.

7) MODIFYING THE SYSTEM PARAMETERS

How to modify system parameters for porter modules.

7A) SETTING THE PORTER FT1602-FT4660 PARAMETERS

How to set parameters for FT1602/FT4660 porter modules.

5) MANAGEMENT OF THE USER LIST

Managing the user list.

5A) ENTERING A NAME BY MEANS OF FT1230

Process for entering names using the FT1230 programmer.

5B) CANCELLING A NAME BY MEANS OF FT1230

Process for deleting names using FT1230 programmer.

5E) READING THE STORED LIST (UPLOAD)

Procedure to upload a list from the module.

6) PARAMETER TABLE

Table of configuration parameters for FT3072/A module.

Digital Call Module FT3070/A

2) INSTALLATION OF THE MODULE

Instructions for installing the FT3070/A module.

3) HOW TO USE THE DIGITAL MODULE

Guide on using the FT3070/A digital call module.

3A) CALL TO A USER:

How to call a user using their code.

4) SETTINGS

Configuration settings for the FT3070/A module.

4A) ACCESSING THE CONFIGURATION STAGE

Steps to enter the configuration mode of the FT3070/A module.

4B) SYSTEM PARAMETERS

System parameters for the FT3070/A module.

4B-1) MODIFYING THE PORTER MODULE CONVERSATION, DOOR-OPENING AND RESET WAIT TIME PARAMETERS

Modifying system parameters for porter modules.

4B-4) CALL MODE

5) ACCESS CONTROL

Managing the access control function.

5A) ENTERING A PASSWORD CODE

5B) ELIMINATION OF A PASSWORD CODE

5C) ELIMINATION OF A PASSWORD CODE

5D) CHANGING THE SUPERCODE

5G) CARRYING OUT A DOOR OPENING OPERATION BY ENTERING THE PASSWORD CODE

5E) CHANGING THE SUPERCODE TO THE DEFAULT VALUE

6B) INSERTING A LIST (DOWNLOAD)

6C) READING THE STORED LIST (UPLOAD)

7) PARAMETER TABLE

Standard and Vandal Combined Access Keypads

Technical characteristics

Programming and functioning modes

1) Insertion of supercode

Procedure for entering supercode

2) Initial programming of relay codes

3) Use of relay codes

4) Deletion of relay codes

5) Bistable/monostable operation

Modification of the relay timing

7) Programming of accepted number of errors

Access Control Devices FT3335 and FT3195

REGISTRATION OR CHANGING A MASTER CARD

SETTING THE ADMINISTRATOR PASSWORD

PROGRAMMING AN ACCESS KEY USING THE MASTER CARD

PROGRAMMING AN ACCESS KEY USING THE PROGRAMMER FT1028

DELETING AN ACCESS KEY

CHANGING THE MASTER CARD USING PROGRAMMER FT1028

CHANGING THE ADMINISTRATOR PASSWORD

CHANGING THE RELAY LOCK TIME

Internal Units

Description of the monitor Genius and user information

Overview and user guide for the Genius monitor.

Installation on wall with bracket FT5714 with 4 expansion anchoring screws

Wall mounting instructions using FT5714 bracket.

Procedure for mounting Monitor to the bacjkplate

Steps for mounting the monitor to the backplate.

Installation of monitor on desk support FT5712

Instructions for installing the monitor on a desk support.

Technical characteristics of bracket FT5714 for Genius monitor

Digi2 Wall Telephone FT2428W/A

Technical characteristics:

How to set the door phone FT2428W/A to work with audio settings*

Instructions to install telephone FT2428W/A

Step-by-step installation guide for the FT2428W/A telephone.

Accessories

Relay Module FT1256

A) Call repeat function.

B) Activation on porter switchboard call pushbutton.

C) External unit Light Function / Stair Lights Function.

D) Secondary Door-opening Function (without external unit).

E) Activation on apartment unit pushbutton.

F) Activation on apartment unit coded pushbutton.

Table A: Programming Relay Closure Time

Table B: Programming Code Range

Configuration of Devices

Programming Bracket FT5714 and Digi2 Telephone FT2428W/A

Programming Switching Device FT1224A

Push Button Programming with FT4660 Group and Modules FT3323/3, FT3323/4, FT3323/6

Table for Programming Dip Switches

General Instructions for Installation and Operation

Explanation of Audio and Video Settings

Mixer-Power Supply FT4896

Mixer-power supply

Installation Rules for Video Door Entry Systems

Avoid placing the riser wires near power supply cables

Table of 1216 Settings according to the type of connection cable used

Maximum Distances and Conductor Characteristics

Table of Maximum Distances by Cable Type

Figures Showing Distances

Operating Notes

Monitor Self-Ignition and Video Request

Wiring Diagrams

Variations of System Diagrams