Need help?Do you have a question about the fortessa FTK5 and is the answer not in the manual?
Introduces the FTK5 Proximity Keypad and advises reading instructions before use.
Procedure for programming a fob or card into the system.
Procedure for programming a user code along with a fob or card.
Methods for removing user data, including all, individual, or consecutive entries.
Defines how users access the system: Fob/Card only, or Fob/Card & Code.
Configures the duration the lock remains active after activation.
Allows changing the master programming code for enhanced security.
Enables programming access using a specific card or fob.
Sets keypad backlight behavior: Disabled, Always On, or Auto.
Assigns a code to activate the Auxiliary Output.
Enables keypad lockout after multiple incorrect code attempts.
Adjusts the number of digits allowed before an error tone.
Sets and enables bypass codes for temporary unlocking or access.
Configures alarm output based on door contact or tamper events.
Sets the duration for the alarm output signal.
Configures how the Auxiliary Output is triggered by various events.
Instructions for restoring the keypad to its factory default settings.
Diagram illustrating internal components and connection points of the keypad.
Illustrates wiring for a magnetic lock in failsafe mode.
Illustrates wiring for a DLU1 lock in failsecure mode.
Provides a summarized list of functions, programming codes, and defaults.
Details technical specifications like power, weight, size, and card type.
To Next Page
General