- 104 -
Syntax
show ipv6 mld snooping static
Default Setting
None
Command Mode
Privilege Exec
User Exec
Display Message
VLAN: The VLAN ID used with the MAC address to fully identify packets you want L2Mcast Group.
MAC Address: The MAC address of the L2Mcast Group in the format 33:33:xx:xx:xx:xx.
Port: List the ports you want included into L2Mcast Group.
State: The active interface number belongs to this Multicast Group.
7.2.8.5 show mac-address-table mldsnooping
The user can go to the CLI Privilege Exec to display the MLD Snooping entries in the Multicast
Forwarding Database (MFDB) table, use the show mac-address-table mldsnooping Privilege
command.
Syntax
show mac-address-table mldsnooping
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: A multicast MAC address for which the switch has forwarding or filtering information.
The format is twodigit hexadecimal numbers that are separated by colons, for example
33:33:45:67:89:AB.
Type: The type of entry, which is either static (added by the user) or dynamic (added to the table as
a result of a learning process or protocol.)
Description: The text description of this multicast table entry.
Interfaces: The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
To Next Page
Loading...
