Fortinet 548B - Page 113

- 113 -
7.2.9.5 ipv6 mld snooping querier address
The user can go to the CLI Global Configuration Mode to set MLD snooping querier address, use the
ipv6 mld snooping querier address <ipv6-address> global configuration command. Use the ipv6 mld
snooping querier address <ipv6-address> return to default value zero.
Syntax
ipv6 mld snooping querier address <ipv6-address>
no ipv6 mld snooping querier address <ipv6-address>
Default Setting
0
Command Mode
Global Config
7.2.9.6 ipv6 mld snooping querier querier-interval
The user can go to the CLI Global Configuration Mode to set MLD snooping querier querier interval, use
the ipv6 mld snooping querier querier-interval <1-1800> global configuration command. Use the no
ipv6 mld snooping querier query-interval return to default value zero.
Syntax
ipv6 mld snooping querier querier-interval <1-1800>
no ipv6 mld snooping querier querier-interval
Default Setting
0
Command Mode
Global Config
7.2.9.7 ipv6 mld snooping querier querier-expiry-interval
The user can go to the CLI Global Configuration Mode to set MLD snooping querier querier expiry
interval, use the ipv6 mld snooping querier querier-expiry-interval <60-300> global configuration
command. Use the no ipv6 mld snooping querier querier-expiry-interval return to default value zero.
Syntax
ipv6 mld snooping querier querier-expiry-interval <60-300>
no ipv6 mld snooping querier querier-expiry-interval
Default Setting
0