Fortinet 548B - Page 126

- 126 -
Default Setting
None
Command Mode
Global Config
7.2.11 Storm Control
7.2.11.1 show storm-control
This command is used to display broadcast storm control information.
Syntax
show storm-control broadcast
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: Displays interface number.
Mode: Displays status of storm control broadcast.
Level: Displays level for storm control broadcast.
Rate: Displays rate for storm control broadcast.
This command is used to display multicast storm control information.
Syntax
show storm-control multicast
Default Setting
None
Command Mode
Privileged Exec
Display Message