Fortinet 548B - Page 140

- 140 -
7.2.16.3 show fip-snooping session
This command displays all FIP snooping sessions for the entire system.
Syntax
show fip-snooping session
Default Setting
None
Command Mode
Privileged Exec
Display Message
FCF MAC: MAC address of the FCF..
ENode MAC: MAC address of the ENode.
FCoE MAC: FCoE MAC address that is used to send the FCoE packets
FCF Interface: The interface to which the FCF is connected
ENode Interface: The interface to which the ENode is connected
7.2.16.4 show fip-snooping fcf
This command displays to what interfaces the FCFs are connected for the entire system.
Syntax
show fip-snooping fcf
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface: Name of the interface to which the FCoE Forwarder (FCF) is connected.
VLAN ID: ID number of the VLAN to which the FCF belongs.
FC MAP: May FC-Map value used by the FCF.
FCF MAC: MAC address of the FCF.
Switch Name: Name ID.
Fabric Name: Name of the FCF.