Fortinet 548B - Page 162

- 162 -
Syntax
exec-timeout <1-160>
no exec-timeout
<sec> - max connect time (Range: 1 -160).
no - This command sets the remote connection session timeout value, in minutes, to the default.
Default Setting
5
Command Mode
Line Vty
7.3.3.5 password-threshold
This command is used to set the password instruction threshold limited for the number of failed login
attempts.
Syntax
password-threshold <0-120>
no password-threshold
<threshold> - max threshold (Range: 0 - 120).
no - This command sets the maximum value to the default.
Default Setting
3
Command Mode
Line Vty
7.3.3.6 terminal length
This command uses to configure the columns per page for the vty session.
Syntax
terminal-length <10-100>
<10-100> - Columns per page (Range: 10 - 100).