Fortinet 548B - Page 188

- 188 -
7.3.9.2 crypto key generate
This command is used to generate an RSA or DSA key pair for SSH.
Syntax
crypto key generate {RSA | DSA}
no crypto key generate {RSA | DSA}
no- This command is used to delete the RSA or DSA key from the device.
Default Setting
None
Command Mode
Global Config
7.3.10 DHCP Client Commands
7.3.10.1 ip dhcp restart
This command is used to initiate a BOOTP or DCHP client request.
Syntax
ip dhcp restart
Default Setting
None
Command Mode
Global Config
7.3.10.2 ip dhcp client-identifier
This command is used to specify the DCHP client identifier for this switch. Use the no form to restore to
default value.
Syntax