Fortinet 548B - Page 225

- 225 -
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
no - This command disables logging to the console.
Default Setting
None
Command Mode
Global Config
7.5.2.3 logging monitor
This command enables logging to the terminal monitor.
Syntax
logging console [<severitylevel> | <0-7>]
no logging console
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
no - This command disables logging to the terminal monitor.
Default Setting
None
Command Mode
Globla Config
7.5.2.4 terminal monitor
This command enables logging for the terminal session.
Syntax
terminal monitor
no terminal monitor
no - This command disables logging for the terminal session.
Default Setting