Fortinet 548B - Page 228

- 228 -
Command Mode
Globla Config
7.5.2.7 clear logging buffered
This command clears all in-memory log.
Syntax
clear logging buffered
Default Setting
None
Command Mode
Privileged Exec
7.6 Script Management Commands
7.6.1 script apply
This command applies the commands in the configuration script to the switch. The apply command
backs up the running configuration and then starts applying the commands in the script file. Application
of the commands stops at the first failure of a command.
Syntax
script apply <scriptname>
<scriptname> - The name of the script to be applied.
Default Setting
None
Command Mode
Privileged Exec