Fortinet 548B - Page 230

- 230 -
<scriptname> - Name of the script file.
Default Setting
None
Command Mode
Privileged Exec
7.6.4 script validate
This command displays the content of a script file.
Syntax
script validate <scriptname>
<scriptname> - Name of the script file.
Default Setting
None
Command Mode
Privileged Exec
7.7 User Account Management Commands
7.7.1 Show Commands
7.7.1.1 show users
This command displays the configured user names and their settings. This command is only available
for users with readwrite privileges. The SNMPv3 fields will only be displayed if SNMP is available on the
system.
Syntax
show users