- 240 -
terminated the port goes into unauthorized state. If the value is Radius-Request, then a
reauthentication of the client authenticated on the port is performed.
7.8.1.6 show dot1x statistics
This command is used to show a summary of the global dot1x configuration and the dot1x statistics for a
specified port.
Syntax
show dot1x statistics <slot/port>
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port: The interface whose statistics are displayed.
EAPOL Frames Received: The number of valid EAPOL frames of any type that have been received
by this authenticator.
EAPOL Frames Transmitted: The number of EAPOL frames of any type that have been
transmitted by this authenticator.
EAPOL Start Frames Received: The number of EAPOL start frames that have been received by
this authenticator.
EAPOL Logoff Frames Received: The number of EAPOL logoff frames that have been received by
this authenticator.
Last EAPOL Frame Version: The protocol version number carried in the most recently received
EAPOL frame.
Last EAPOL Frame Source: The source MAC address carried in the most recently received
EAPOL frame.
EAP Response/Id Frames Received: The number of EAP response/identity frames that have been
received by this authenticator.
EAP Response Frames Received: The number of valid EAP response frames (other than resp/id
frames) that have been received by this authenticator.
EAP Request/Id Frames Transmitted: The number of EAP request/identity frames that have been
transmitted by this authenticator.
EAP Request Frames Transmitted: The number of EAP request frames (other than
request/identity frames) that have been transmitted by this authenticator.
Invalid EAPOL Frames Received: The number of EAPOL frames that have been received by this
authenticator in which the frame type is not recognized.
To Next Page