Fortinet 548B - Page 300

- 300 -
7.13 Denial Of Service Commands
7.13.1 Show Commands
7.13.1.1 show dos-control
This command displays the Denial of Service configurations for the entire system.
Syntax
show dos-control
Default Setting
None
Command Mode
Privileged Exec
Display Message
TCP Fragment Mode: May be enabled or disabled. The factory default is disabled.
Min TCP Hdr Size: The range is 0-255. The factory default is 20.
ICMP Size Mode: May be enabled or disabled. The factory default is disabled.
Max ICMPv4 Pkt Size: The range is 0-16384. The factory default is 512.
Max ICMPv6 Pkt Size: The range is 0-16384. The factory default is 512.
ICMP Fragment Mode: May be enabled or disabled. The factory default is disabled.
TCP Port Mode: May be enabled or disabled. The factory default is disabled.
UDP Port Mode: May be enabled or disabled. The factory default is disabled.
SIPDIP Mode: May be enabled or disabled. The factory default is disabled.
SMACDMAC Mode: May be enabled or disabled. The factory default is disabled.
TCP FIN&URG&PSH Mode: May be enabled or disabled. The factory default is disabled.
TCP Flag&Sequence Mode: May be enabled or disabled. The factory default is disabled.
TCP SYN Mode: May be enabled or disabled. The factory default is disabled.
TCP SYN&FIN Mode: May be enabled or disabled. The factory default is disabled.
First Fragment Mode: May be enabled or disabled. The factory default is disabled.
TCP Fragment Offset Mode: May be enabled or disabled. The factory default is disabled.