Fortinet 548B - Page 328

- 328 -
7.17.1.21 clear lldp remote-data
This command will use to delete all information from the LLDP remote data table.
Syntax
clear lldp remote-data
Default Setting
None
Command Mode
Privileged Exec
7.17.1.22 enable passwd
This command changes Privileged EXEC password.
Syntax
enable passwd
Default Setting
None
Command Mode
Global Config.
7.17.1.23 enable passwd encrypted
This command allows the administrator to transfer the enable password between devices without having
to know the password. The <password> parameter must be exactly 128 hexidecimal characters.
Syntax
enable passwd encrypted <password>
Default Setting
None
Command Mode