Fortinet 548B - Page 41

- 41 -
7.1.12 show command filter
This command displays the information that begin/include/exclude the regular expression.
Syntax
show command [| begin/include/exclude <LINE>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
command: Any show command of the CLI
begin: Begin with the line that matches
include: Include lines that match
exclude: Exclude lines that match
<LINE>: Regular Expression
7.2 Device Configuration Commands
7.2.1 Interface
7.2.1.1 show interface status
This command displays the Port monitoring information for the system.
Syntax
show interface status {<slot/port> | all}
<slot/port> - is the desired interface number.
all - This parameter displays information for all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: The physical slot and physical port.
Type: If not blank, this field indicates that this port is a special type of port. The possible values are: