Fortinet 548B - Page 419

- 419 -
Default Setting
The default value is 1200.
Command Mode
Global Config
8.1.2.10 clear ip arp-cache
This command causes all ARP entries of type dynamic to be removed form the ARP cache. If the
[gateway] parameter is specified, the dynamic entries of type gateway are purged as well.
Syntax
clear ip arp-cache [gateway | interface <slot/port>]
Default Setting
None
Command Mode
Privileged Exec
8.2 IP Routing Commands
8.2.1 Show Commands
8.2.1.1 show ip brief
This command displays all the summary information of the IP.
Syntax
show ip brief
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message