Fortinet 548B - Page 446

- 446 -
8.3.1.15 show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
Syntax
show ip ospf virtual-link brief
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID: The area id of the requested OSPF area.
Neighbor: The neighbor interface of the OSPF virtual interface.
Hello Interval: The configured hello interval for the OSPF virtual interface.
Dead Interval: The configured dead interval for the OSPF virtual interface.
Retransmit Interval: The configured retransmit interval for the OSPF virtual interface.
Transit Delay: The configured transit delay for the OSPF virtual interface.
8.3.2 Configuration Commands
8.3.2.1 router ospf
Use this command to enter Router OSPF mode.
Syntax
router ospf
Default Setting
None
Command Mode
Global Config