Fortinet 548B - Page 90

- 90 -
7.2.6.7 ip igmp snooping mrouter interface
The user can go to the CLI Interface Configuration Mode to configure the interface as a multicast
router-attached interface or configure the VLAN ID for the VLAN that has the multicast router attached
mode enabled, use the ip igmp snooping mrouter interface|<vlanId> interface configuration
command. Use the no ip igmp snooping mrouter interface|<vlanId> disable multicast router attached
mode for the interface or a VLAN.
Syntax
ip igmp snooping mrouter interface|<vlanId>
no ip igmp snooping mrouter interface|<vlanId>
<vlanid> - VLAN ID (Range: 1 – 3965).
Default Setting
None
Command Mode
Interface Config
7.2.6.8 set igmp
The user can go to the CLI VLAN Mode to set IGMP Snooping on a particular VLAN, use the set ipgm
<vlanid> vlan configuration command. Use the no set igmp <vlanid> to disable IGMP Snooping on a
particular VLAN.
Syntax
set igmp <vlanid>
no set igmp <vlanid>
<vlanid> - VLAN ID (Range: 1 – 3965).
Default Setting
Disabled
Command Mode
VLAN Mode
7.2.6.9 set igmp fast-leave
The user can go to the CLI VLAN Configuration Mode to set IGMP Snooping fast-leave admin mode on
a particular VLAN, use the set igmp fast-leave <vlanid> vlan configuration command. Use the no set
igmp fast-leave <vlanid> disable IGMP Snooping fast-leave admin mode.