Fortinet FortiAP 234G - Setup Options; PoE Installation; Direct Connection; FortiLAN Cloud

Power Outlet
or UPS
PoE Connection
LAN Port
PoE Port
Reset Button
Setup Options
Power the device with the provided 802.3af/at PoE injector or FortiGate PoE port.
FortiLAN Cloud
PoE Installation
Ethernet Cable
(not included)
FortiAP
LAN Port
FortiAP
LAN Port
FortiAP
LAN Port
FortiGate
Ethernet Port
FortiGate
Ethernet Port
Same Network
Note: Use your FortiCloud credentials to log in, then click Inventory,
Import AP Key and enter the Cloud Key on the device sticker
Note: To self-configure, preauthorize the FortiAP on your FortiGate
Otherwise once connected, wait for the FortiAP to appear on the
Managed FortiAP page in FortiOS.
Note: Connect to the FortiAP using 192.168.1.2 with username admin
and set a password. Specify the FortiGate IP using:
cfg -a AC_IPADDR=0.0.0.0
cfg -c
where 0.0.0.0 is the FortiGate IP.
Direct Connection
Network Connection
1
1
1
2
3
3 4
3
6
FortiLAN Cloud
Ethernet Cable
(not included)
Ethernet Cable
(not included)
2
2
7
https://fortilan.forticloud.com
(Press and hold 5secs to reboot;
press and hold 10secs to factory reset)