8 9
Bracket Installation Antenna Installation
(FAP-433F only)
The FortiAP mounts on a ceiling using the provided T-rail mounting brackets
which come in two standard sizes: 1.43cm (9/16in) and 2.38cm (15/16in).
1. Select the bracket for the T-rail size: 1.43cm (9/16in) or 2.38cm (15/16in)
2. With the ports facing you, slide the bracket left to right
3. Hold the device against the ceiling T-rail and push until it snaps into place
1. Insert the antenna base firmly into the appropriate antenna mount
2. Securely hand tighten the antenna fastening collar
3. Repeat for the remaining antennas
Note: Antennas A1 to A4 radiate Radio1/Radio2 at 2.4/5.0GHz and
Antenna A5 scans at 2.4/5.0GHz.
To Next Page
Loading...
