Need help?Do you have a question about the Fortinet FortiGate 30B and is the answer not in the manual?
General| Form Factor | Desktop |
|---|---|
| Interfaces | 5 x GE RJ45, 1 x GE RJ45 DMZ, 1 x Console |
| Weight | 2.2 lbs (1 kg) |
| Power Supply | AC 100-240V, 50/60Hz |
| New Sessions/Second | 1, 000 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
| Humidity | 10% to 90% non-condensing |
Important safety precautions and warnings to review before installing the unit.
Step-by-step instructions for connecting power and turning on the FortiGate unit.
Details how to configure the FortiGate unit in NAT/Route mode.
Describes how to configure the FortiGate unit in Transparent mode.
Instructions on how to connect to the FortiGate unit for administration.
Steps to connect to the FortiGate's web-based manager via a web browser.
Guide to connecting to the FortiGate Command Line Interface (CLI).
Procedures for basic NAT/Route mode configuration.
Instructions for configuring network interfaces with addressing modes.
Instructions on creating firewall policies to control network traffic.
Steps to configure Transparent mode, including management IP and policies.
Instructions for creating firewall policies in Transparent mode.
CLI commands for creating firewall policies in Transparent mode.
Instructions on how to back up the FortiGate unit's configuration.
Procedures for restoring a previously backed-up configuration file.
Explains firewall policies and how they control network traffic.
Detailed steps on adding or editing firewall policies.
How to temporarily install and test new firmware without permanent installation.
To Next Page
