Need help?Do you have a question about the Fortinet FortiGate 500 and is the answer not in the manual?
Configures firewall policies for network traffic, including NAT/Route mode, transparent mode, and VLANs.
Detects and alerts on suspicious network activity and attacks using signature-based analysis.
Establishes secure network connections for remote access and site-to-site communication.
Provides redundancy and failover mechanisms for continuous operation.
Covers initial setup, configuration via Web or CLI, and basic system management.
Explains the conventions used in the manual for commands and syntax.
Lists the items included in the FortiGate-500 package.
Provides guidelines for physically placing and installing the FortiGate device.
Details the steps for powering on and initializing the FortiGate device.
Explains how to access and connect to the device's web-based management interface.
Describes how to connect to the device's command-line interface for configuration.
Details the default network and firewall configurations out-of-the-box.
Guides on planning the network integration and configuration strategy for the device.
Lists the maximum parameter values for different FortiGate models.
Provides guidance on subsequent configuration steps after initial setup.
Details configuring NAT/Route mode for devices with multiple external network connections.
Information required for setting up the NAT/Route mode configuration.
Information required for setting up the transparent mode configuration.
Configures the device's date, time, and timezone for accurate logging and scheduling.
Enables the antivirus scanning feature to protect against malware threats.
Guides on registering the device with Fortinet for support and updates.
Sets up automatic updates for antivirus and attack definition files.
Details on physically connecting the FortiGate device to the network infrastructure.
Configures HA in active-passive mode for failover redundancy.
Configures HA in active-active mode for load balancing and redundancy.
Details HA configuration for devices operating in NAT/Route mode.
Details HA configuration for devices operating in transparent mode.
Procedures for managing and monitoring the HA cluster and its members.
Advanced settings for HA configuration, including master device selection and weights.
How to change the hostname of the FortiGate device.
Steps to upgrade or downgrade the FortiGate device firmware.
Manually updates the antivirus definition files on the device.
Manually updates the attack definition files on the device.
Procedure to back up the device's system configuration.
Restores the device configuration from a backup file.
Resets the device configuration to its factory default settings.
Changes the device's operation mode to transparent mode.
Changes the device's operation mode to NAT/route mode.
Restarts the FortiGate device.
Shuts down the FortiGate device.
Displays the current operational status of the FortiGate system.
Shows a list of active communication sessions on the FortiGate.
Configures automatic updates for virus and attack definitions from FortiGuard.
Defines and manages network zones for policy application.
Configures IP addresses, masks, and other settings for network interfaces.
Sets up VLANs to segment the network and apply policies to specific traffic.
Sets up static routes, default routes, and policy routing for network traffic.
Configures the FortiGate to act as a DHCP server for the internal network.
Configures basic RIP functionality, metrics, and timers.
Configures RIP settings for individual FortiGate interfaces and VLANs.
Defines RIP neighbors for exchanging routing information.
Controls the routing information received and sent by FortiGate.
Sets the system date, time, and timezone, optionally synchronizing with NTP servers.
Customizes options within the web-based management interface.
Manages administrator accounts, permissions, and access controls.
Configures SNMP settings for monitoring FortiGate devices and receiving traps.
Customizes messages displayed during events like virus detection or file blocking.
Details the default firewall policies and their behavior.
Creates and adds new firewall policies to control network traffic.
Manages the order and behavior of firewall policies.
Defines and manages network addresses and address groups for policy matching.
Configures predefined and custom services for firewall policies.
Schedules firewall policies to be active or inactive at specific times.
Configures virtual IP addresses for NAT and port forwarding.
Manages pools of IP addresses for dynamic NAT translation.
Enforces IP and MAC address binding to prevent spoofing.
Defines profiles for antivirus, web filtering, and email filtering.
Sets the timeout period for user authentication sessions.
Manages local user accounts and their authentication settings.
Integrates FortiGate with RADIUS servers for centralized authentication.
Integrates FortiGate with LDAP servers for centralized authentication.
Creates and manages user groups for applying policies and authentication.
Covers the management of encryption keys and security parameters for VPNs.
Details configuration steps for manual key IPSec VPN tunnels.
Configuration steps for automatic IKE IPSec VPN tunnels.
Manages digital certificates for securing VPN communication.
Defines policies to control VPN traffic based on source, destination, and services.
Configures the FortiGate as a VPN concentrator for star topology networks.
Sets up redundant IPSec VPN connections for continuous availability.
Monitors VPN tunnel status and provides troubleshooting guidance.
Configures PPTP VPN connections, including gateway setup and client configuration.
Configures L2TP VPN connections, including gateway and client setup.
Steps for configuring antivirus scanning, file blocking, and quarantine.
Steps for configuring web content filtering, including URL blocking and script filtering.
Steps for configuring email filtering, including forbidden word lists and blocking.
Configures logging of network activities, events, and alarms.
To Next Page
General