Factory defaults Restoring the default settings
FortiGate-3000 and FortiGate-3600 FortiOS 3.0MR4 Install Guide
01-30004-0270-20070215 29
Restoring the default settings using the web-based manager
To reset the default settings
1 Go to System > Status.
2 In the Unit Operation display, select Reset.
Restoring the default settings using the CLI
To reset the default settings enter the following command:
execute factoryreset
Note: If you want to restore factory default settings using the front control buttons and LCD,
see “LCD front control buttons” on page 23.
To Next Page
Loading...
