Fortinet FortiGate FortiGate-4000 Administration Guide

228 01-28006-0012-20041105 Fortinet Inc.
Protection profile Firewall
3 Select Create New to add a policy or select Edit for the policy you want to modify.
4 Select protection profile.
5 Select a protection profile from the list.
6 Configure the remaining policy settings, if required.
7 Select OK.
8 Repeat this procedure for any policies for which you want to enable network
protection.
CLI configuration
profile
Use this command to add, edit or delete protection profiles. Use protection profiles to
apply different protection settings for traffic controlled by firewall policies.
Command syntax pattern
config firewall profile
edit <profilename_str>
set <keyword> <variable>
end
config firewall profile
edit <profilename_str>
unset <keyword>
end
config firewall profile
delete <profilename_str>
end
get firewall profile [<profilename_str>]
show firewall profile [<profilename_str>]
Note: This guide only describes Command Line Interface (CLI) commands, keywords, or
variables (in bold) that are not represented in the web-based manager. For complete
descriptions and examples of how to use CLI commands see the FortiGate CLI Reference
Guide.

Fortinet FortiGate FortiGate-4000 Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-4000
Category	Firewall
Language	English