16 17
Ethernet Cable
1. Connect port 1 to the Management Computer using the suplied Ethernet cable
2. Enable DHCP or set the Management Computer’s IP and subnet to:
Static IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
3. Visit 192.168.1.99 in a web browser
4. Log in with username admin and no password
5. You can now configure your FortiSandbox
Management Computer
Port 1
Browse to 192.168.1.99
Username: admin
No Password
GUI
A
CLI
B
1. Connect the Console Port with a console cable to the Management Computer
2. Start a terminal program on the Management Computer and select an available
COM Port
using the following default settings:
Baud rate:
9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
3. Log in using username admin and no password
4. You can now configure your FortiSanbox
5. See the next page for Useful CLI Commands
Console Port
Serial Port
Console Cable
To Next Page
Loading...
