Fortress Technologies FHT2014 User Manual

6
OPERATION INSTRUCTION
Connect the power plug to the correct socket outlet (220-240V~/50Hz).
Power switch
The power switch is at the bottom of rear cover under the air filter.
Press the power switch to “I” position, you will hear a “beep-beep” sound, the heater is ready to use.
Press the power switch to “0” position for turning off the heater.
Control Panel/LED display window
On/Off key ( )
Press the On/Off key, the heater will start operation at low heating power, the low heating power
indicator will turn on, and the LED display will show the room temperature. Press the On/Off key again,
the heater will turn off in few seconds.
High/Low heating power key ( )
Press the high/low heating power key to change high or low heating power during operation. The low
power indicator or the high power indicator will turn on according to the selection.
Low Heating Power Indicator
High Heating Power Indicator
Operation Indicator
Oscillation Indicator

Fortress Technologies FHT2014 Specifications

General

Brand	Fortress Technologies
Model	FHT2014
Category	Heater
Language	English