The wash stops
Program selection
1. Install the washer
3. Put in suitable amount of
washing powder
7. Plug the power supply
8. Press “Power” button
9. Select desired program
5. Hang up the drain pipe
4. Close the washer door
10. Press “Start/Pause” button
When the washer stops, the buzzer will buzz continuously for 6 times and the power will be
Turn off the water tap.
Although the power can be cut off automatically, the power plug must be pulled out as well for safety.
1
Press the “Power” button.
3
Press the “Start/Pause” button.
2
Select the proper water level or other attached functions.
2. Load the laundry
Quick start
6. Turn on the water tap
automatically cut off.
To Next Page
Loading...
Need help?
General
