EasyManua.ls Logo

Fortress Technologies Pro Series User Manual

Default Icon
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FENCING INSTALLATION: PRO-SERIES DROP ROD
1
PROSERIES HARDWARE
INSTALLATION INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the Fortress Technologies Pro Series and is the answer not in the manual?

Fortress Technologies Pro Series Specifications

General IconGeneral
BrandFortress Technologies
ModelPro Series
CategoryFencing & Gates
LanguageEnglish

Summary

INTRODUCTION

Before You Begin

Contact local building code department and HOA for permits and regulations. Call 811 before digging.

Cutting Fortress Fencing

Instructions for cutting Fortress Fencing, including removing shavings, filing edges, and applying touch-up paint.

Torx Safety Tips

Use lowest drill speed setting and low torque for tightening screws to prevent bit breakage.

Required Tools

PRO-SERIES DROP ROD Components

Drop Rod

The primary rod component of the Pro-Series Drop Rod system.

Locking Plate

A plate used to secure the drop rod to the gate upright.

Upper Rod Clip

The upper clip that holds the drop rod in place.

Lower Rod Clip

The lower clip that secures the drop rod at its resting point.

Retaining Clip

A clip used to secure the drop rod within the lower rod clip.

DROP ROD INSTALLATION

Step 1: Install Locking Plate & Upper Rod Clip

Mounts the locking plate and upper rod clip to the gate upright, securing the drop rod.

Step 2: Install Lower Rod Clip & Retaining Clip

Attaches the lower rod clip and retaining clip to the gate for the drop rod's final position.

Step 3: Dig A Hole For The Drop Rod

CARE & MAINTENANCE

Cleaning Powder-Coated Products

Use warm water and pH neutral detergent. Rinse thoroughly and dry with a soft cloth or sponge.

WARRANTY