To Next PageTo Next Page
Need help?Do you have a question about the FortrezZ WV-01 and is the answer not in the manual?
Component with Z-Wave radio transceiver for automatic water shut-off.
Detects leaks/freezing, sends Z-Wave signal to shut off water.
Details on pressure, temperature, and application for the water valve.
Explains the meaning of red, green, and yellow indicator lights on the device.
Stresses adherence to codes and professional installation skills for safety.
Highlights power disconnection, eye protection, and ball valve cautions.
Instructions for testing the valve's open/close function after plugging in.
Describes the buttons, status light, and power-on behavior for manual operation.
Explains different modes indicated by fast blinks for network status.
Details how NWI mode allows automatic inclusion into existing networks.
Steps to add the valve to a Z-Wave network using a controller.
Procedure for removing the valve from a Z-Wave network.
How to link sensors directly to the valve for immediate control.
Explains default Water Alarm and Water Level modes for specific applications.
Describes using the manual handle for shut-off during power outages.
Details how the valve responds to Basic Get/Set commands for position.
Explains how the valve uses Binary Switch commands for open/close operations.
Describes Manufacturer Specific and Version command classes for device identification.
Details how to switch modes and set water level timeouts.
Explains how the valve signals power management events and battery status.
Lists fault indications based on slow LED blinks and their corresponding causes.
Details compliance with FCC rules for digital devices and transmitters.
Provides guidelines for safe human exposure to radio frequency fields.
Outlines Industry Canada requirements for radio equipment.
Notes the WV-01 module's certification for use in European countries.
Explains how sensors detect leaks and instruct the valve to shut off water.
Advises on where to install the shut-off valve indoors in the main water line.
Discusses common fittings for copper pipes and the need for appropriate connectors.
Step-by-step instructions for installing the valve using compression fittings.
Steps to position, tighten, and test the valve after compression fitting installation.
Describes soldering as an alternative installation method requiring professional skill.
Lists recommended areas for placing water alarm sensors to detect leaks.
Guidance on closing valves during major repairs and manual cycling.
Detailed steps to test the water valve system after installation and configuration.
Lists critical warnings about unit usage, power, and handling.
Explains how to manually operate the valve during power outages or damage.
Notes that wireless transmissions can be subject to RF interference.
States the system must not be used in life support or safety-critical applications.
Details the terms and conditions of the limited manufacturer's warranty.
Information on returning the product for exchange or refund within 30 days.
General| Brand | FortrezZ |
|---|---|
| Model | WV-01 |
| Category | Control Unit |
| Language | English |
